Gasboy Magnetic Card Encoder Manual de usuario descargar pdf (Pagina 8)

Installing MCE Communication Connections

Page 2-2 MDE-4507 Magnetic Card Encoder User’s Manual · June 2006

Communication Connections

MCE requires the use of a PC for operation. The type of PC used can vary according to the

application and optional printer(s) that may be connected.

Only the authorized Gasboy model encoder hardware, purchased from Gasboy, will work with

this MCE software.

Figure 2-1: Back Panel and Side View of MCE

• Power switch: Power on/off the unit.

• DC Jack: Connect the AC adapter supplied with the unit.

• RS-232 Connector: Connect to Host/PC with the interface cable supplied with the unit.

Note: Turn the power off before connecting the interface cable to the unit.

D-sub-9S (female)

Pin No. Signal

2 RD (RxD)

3 SD (TxD)

4 ER (DTR)

5 SG (GND)

6 DR (DSR)

7 RS (RTS)

8 CS (CTS)

Shield FG

D-sub-9S (female)

Pin No. Signal

2 RD (RxD)

3 SD (TxD)

4 ER (DTR)

5 SG (GND)

6 DR (DSR)

7 RS (RTS)

8 CS (CTS)

Shield FG

Power Switch

DC Jack

RS-232 Connector

Model number & Serial number

FCC Label

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 41 42

Sin comentarios

Gasboy Magnetic Card Encoder Manual de usuario Pagina 8