Gasboy Magnetic Card Encoder Manual de usuario descargar pdf (Pagina 15)

MDE-4507 Magnetic Card Encoder User’s Manual · June 2006 Page 3-1

Communication Port Connecting to MCE

3 – Connecting to MCE

Communication Port

Gasboy MCE has one asynchronous communication port for connecting RS232 to a PC. The

connection should be made with the supplied cable. If the cable needs to be extended, the

overall cable length is limited to 50 feet. See “Installing MCE” on page 2-1 for specific

installation connections.

The serial port is used for connecting a PC. All commands to the encoder are processed

through this port. Refer to “Configuring COM Port Settings” on page 8-2 to program which

PC COM port the encoder is to be connected to.

Printer(s)

Hard-copy Printer - This is an optional printer used to provide hard-copy printouts. This

device should be connected to the PC parallel port, if used.

Note: The printer should be UL listed and should not be used over a hazardous location.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 41 42

Sin comentarios

Gasboy Magnetic Card Encoder Manual de usuario Pagina 15