Gasboy Magnetic Card Encoder Manual de usuario descargar pdf (Pagina 20)

Working with MCE Creating a Card Layout

Page 4-4 MDE-4507 Magnetic Card Encoder User’s Manual · June 2006

Personal Identification Number (PIN) Key Field

In this field, enter the PIN Key assigned to your site (Figure 4-5).

Figure 4-5: PIN Key

Entering Constant Fields

Constant fields are typically used for system ID, or any field that remains the same on each

card. Constants can be 0-9, A, C, E.

To enter a constant field into the card layout, proceed as follows:

1 Enter the number (for example - 7559) in the Constants box (Figure 4-6).

2 To include the constant in the PIN Layout, select the Include in PIN Layout checkbox.

Note: The software uses this constant in the PIN calculation for each card, if this checkbox is

selected. System ID should not be included in the PIN calculation.

3 Click Insert Constant Field. The Card Layout and PIN Layout fields are automatically

updated.

Note: You may enter constants at any time. For example, entering an expiration date after the

sequential fields.

Figure 4-6: Gasboy Card Encoder - Updated Card and PIN Layout Fields

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 41 42

Sin comentarios

Gasboy Magnetic Card Encoder Manual de usuario Pagina 20