Gasboy 1000 Series FMS Startup Manual Manual de usuario descargar pdf (Pagina 7)

GASBOY Series 1000

1-2 03/07/03

START-UP OVERVIEW

Start-up for the Series 1000 System consists of:

• verifying the system layout

• making sure the system complies with the guidelines and restrictions outlined in the system

Installation Guide and this manual.

• testing the system

• helping the system user execute the commands needed to start the system

• making sure the customer understands how the system works

• filling out the GASBOY Series 1000 Start-up Form, 55F065

WHAT YOU NEED FOR TESTING

To perform the testing portion of start-up, you will need:

• a digital voltmeter

• a 1/4 inch flat blade screwdriver

• a Phillips head #1 screwdriver

• a Phillips head #2 screwdriver

• a plastic 1/8 inch or smaller flat blade screwdriver

• a tape measure

We recommend that you bring all your tools and spare parts when doing a start-up.

FILLING OUT THE START-UP FORM

A sample filled-out Start-Up form appears at the end of this manual. You should already have

blank copies of the Start-up form; however, if you do not, you can obtain more by calling GASBOY

Office Services Department. Throughout the procedures in this manual, you will find double-

outlined boxes preceded by this symbol

✍ . This writing hand symbol tells you to "fill in" the

start-up information for the entries contained in the box.

When you encounter a box, fill in all the information requested. If an option is not used or does

not apply, fill in N/A (not applicable) in that space. It may be helpful to have the terminal operator

review the Series 1000 Operation Manual, if he has not already done so, while you are starting up

the system.

The Start-Up Form must be filled out completely and sent to:

Gasboy International LLC

Customer Service Dept.

707 N. Valley Forge Rd.

P.O. Box 309

Lansdale, Pa 19446

1 2 3 4 5 6 7 8 9 10 11 12 ... 56 57

Sin comentarios

Gasboy 1000 Series FMS Startup Manual Manual de usuario Pagina 7