Gasboy 9800A Manual de usuario descargar pdf

032114 Rev. 8243 Page 1

MODEL 9800A FRONT LOAD VAPOR RECOVERY KIT INSTALLATION INSTRUCTIONS

This instruction sheet covers the installation of the Model 98A Front Load Balanced System Vapor Recovery Kit. If

you are installing another manufacturer’s vapor recovery system, you may need to modify the nozzle boot using the

Modify Nozzle Boot

instructions below. If you ordered a Vapor Recovery Kit, P/N 032107, you should have

received the following:

Item Qty. P/N Description

1 1 032671 Clamp and Reel Assy.

2 1 063816 Support Post

3 1 017930 Cap plug 1-1/2”

4 3 051955 Screw 5/16-18 x 2

5 4 068080 Washer 5/16

6 4 068875 Washer, Lock 5/16

7 1 056924 Spacer

8 1 013250 Bolt 5/16 (Anchor)

9 1 047219 Plug Button

10 1 051970 Screw 5/16-18 x 2-1/2

Item Qty. P/N Description

11 1 064560 ¾” Swivel

12 1 038502 Nozzle-Emco VR

13 1 030301 Hose GY 7.5’

14 1 066817 Splitter, Emco

15 1 030407 Hose ¾” HW 1.5’

16 1 017270 ¾” to 1” Bushing

17 1 044007 Breakaway

18 1 030303 Hose GY 4.5’

N/A 1 032114 Instruction Sheet

N/A 1 035282 Warning Sheet

Important:

Always use a UL-classified gas- and oil-resistant pipe compound on all male pipe threads when

assembling these components. All references to pipe compound in these instructions imply UL-classified pipe

compound.

1. Read all instructions before beginning. A separate instruction sheet is packed with the EMCO Wheaton splitter

manifold, which is required for mounting this component. Also, read and follow all precautions regarding

remote dispensers and pumps on the Warnings and Safeguards sheet, 035282, included in this kit.

2. Turn off power to the dispenser at the breaker and activate emergency shutoff valve.

3. Mount the splitter per the EMCO Wheaton instructions.

Assemble Product Jumper Hose

4. Assemble ¾” x 1” bushing (017270) to dispenser outlet. Assemble ¾” swivel (064560) to one end of ¾” jumper

hose (030407). Assemble fixed end of jumper hose to bushing on dispenser outlet, and the swivel end at the

splitter port labeled

FUEL

Mounting Hose Retriever

5. Assemble clamp and reel assembly (item 1) to support post (item 2) with hardware items 4, 5, and 6.

6. Install reel and support post assembly to side of dispensing unit with items 4, 5, 6, 7, and 10 and leave loose.

Item 7 mounts between post and side panel.

7. Making sure that support post is plumb, mark and drill a 5/8” dia. x 1-3/4” deep hole in island. Install anchor

bolt (item 8) into island surface. Install items 4, 5, and 6.

8. Tighten all hardware from Step 9. Plug hole in support post with item

Modifying Nozzle Boot

9. If using a long spout vapor-recovery nozzle, it may be necessary to

remove the nozzle restraint bracket and the lock plate as shown in the

illustration at right.

1 2

HIGH HOSE RETRIEVER OVERVIEW 2

Indice de contenidos

Pagina 1

032114 Rev. 8243 Page 1MODEL 9800A FRONT LOAD VAPOR RECOVERY KIT INSTALLATION INSTRUCTIONSThis instruction sheet covers the installation of the Mode

Pagina 2 - HIGH HOSE RETRIEVER OVERVIEW

032114 Rev. 8243 Page 2Mounting Hose to Retriever10. Lubricate the new inverted hose threads and O-rings with a white lithium based grease and thre

Modelos relacionados 9800Q Front Load Vapor

Mas documentos para Hardware Gasboy 9800A

a Ver el documento Gasboy 9800A Manual de usuario

Gasboy 9800A Manual de usuario (2 paginas)

Gasboy 9800A Manual de usuario (4 paginas)

Gasboy 9800A Manual de usuario (1 paginas)

Gasboy 9800A Manual de usuario (3 paginas)

Gasboy 9800A Manual de usuario (12 paginas)

Comentarios a estos manuales

Sin comentarios

Gasboy 9800A Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Gasboy 9800A. Gasboy 9800A User Manual Manual de usuario

Indice de contenidos

Modelos relacionados 9800Q Front Load Vapor

Mas documentos para Hardware Gasboy 9800A

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Gasboy 9800A